6 video adjustment – Speco Technologies SIPT5 User Manual

Page 35

Text mode
Original mode

2-31

2.3.6 Video

Adjustment

This section tells you how to adjust the streaming video.

STEP 1: Click the [Video Adjust] on the “Main Setup page”.

The “Video adjust page” is displayed as below

STEP 2: Set the

heckbox to enable motion detection function.

STEP 3: Set the

sensitivity of motion detection windows.

STEP 4: Set the

interval time of motion detection. . Within the

interval time after the motion event is triggered, no motion event will
be triggered.

STEP 5: Set the

trigger threshold of motion detection windows.

STEP 6: In motion activity window

the bar shows the motion

activity status. You can also see the trigger threshold (Red line). When
the motion activity exceeds the trigger threshold, the bar would
become red to indicates an motion event is triggered. While viewing at

This manual is related to the following products:

SIPD4 SIPSD10X