Siemens M SERIES MG-2D - Manual (Page 19)

Multi Address Appearance on OpenStage 00.00.2007 I 19
Line action mode: Determines the consequence for an established connection when the line
key is pressed. Value range: "Hold", "Release"
Default: "Hold"
Show focus: Determines whether the line key LED blinks or is steady when it is in use. Value
range: "Yes", "No"
Default: "Yes"
Reservation timer: Sets the period in seconds after which a line reservation is cancelled. If set
to 0, the reservation timer is deactivated.
Default: 60
Forward indication: Activates or deactivates the indication of station forwarding. Value range:
"Yes", "No"
Default: "No"
Preselect mode: Determines whether an incoming call is accepted by a single press on the
corresponding line key or a double press is needed. Value range: "Single button",
"Preselection"
Default: "Single button"
Preselect timer: Sets the timeout in seconds for accepting an incoming call.
Bridging enabled (V2): When set to "Yes", the user is allowed to join a call on a shared line. For
this purpose, a server based conference is established. Not relevant for MAA.
FPK line key programming
WBM configuration:
Invoke the "Phone keys" dialog and select "line" in the pulldown menu of the key you want to
configure. Next, press "Edit...".
FPK programming: Line key
options per FPK.
Remark: It is recommended to configure primary lines only on keys 1 to 6, or 1 to 5, if a shift key is
needed. This ensures that the lines are still accessible when the user migrates to a different phone with
fewer keys via an optional mobility feature.
A line corresponds to a SIP address of record (AoR), which can have a form similar to an Email address,
or can be a phone number. It is defined by the Address of record parameter. For registration of the line,
a corresponding entry must exist on the SIP server resp. the SIP registrar server.
A label can be assigned to the line key by setting its Key label.