Sharp FO-2950M - Manual (Page 91)

Broadcasting
89
7. S
pec
ia
l
Func
ti
ons
1
Press these keys.
The display will show:
GROUP ENTRY MODE
1=SET, 2=CLEAR
2
Press 1 (SET) to program a Group
Key, or 2 (CLEAR) to clear a Group
Key.
3
To program a Group Key, press the
key you want to program (one of
Rapid Keys 17/G1 to 20/G4).
To clear a Group Key, press the key
you want to clear and go to Step 5.
(Example)
Storing numbers in Group Keys
Group Keys allow you to dial a group of fax numbers by simply
pressing the appropriate Group Key once. To store a group of numbers
in a Group Key, follow the steps below.
Rapid Keys 17/G1 through 20/G4 can be used as Group Keys. Note
that one key cannot be simultaneously programmed as both a Group
Key and a Rapid Key.
♦ Up to 30 numbers can be stored in one Group Key.
♦ Only Rapid Key and Speed Dial numbers (excluding numbers set
for Chain Dialing) can be stored in a Group Key. Full numbers can-
not be stored.
FUNCTION
7
or
SET CLEAR
1 2
19/G3 18/G2 17/G1
all-fo2950.book Page 89 Monday, September 25, 2000 8:57 AM