Sharp X2 - Manual (Page 51)

Maintaining Print Quality 39
Head Maintenance (con’t)
Test Print
You can print the nozzle test pattern through the operation panel.
This is performed to check for clogged nozzles.
Procedures
1. Press the Menu mode button.
2. Press the button associated with the TEST PRINT option to enter
the test print mode.
3. Press the button associated with the NOZZLE TEST option.
4. Use the arrow buttons to select the FRONT or REAR roll.
4. Press the button associated with the PRINT option to execute the
print.
6. Verify that the adjustment was successful. If not, repeat the
process. If this still does not resolve the problem, call your
service representative.
S
NOZZLE TEST Î
S
* W/O INFO. +
FRONT -
PRINT Î
S
TEST PRINT Î
HEAD MAINTENANCE Î