Spalding 211789 - Manual (Page 8)

8
P/N 211789 02/04
SECTION A: ASSEMBLE THE POLES
2.
1.
Wood Scrap
2
1
5"
(13 cm)
5"
(13 cm)
1
3
2
Correctly identify each pole section. Mark pole sections with tape as shown.
TAPE
(not supplied)
TAPE
(not supplied)
Bounce middle pole section (2) into top pole section (1) together using a wood scrap as shown
until they no longer move toward taped reference mark.
IMPORTANT!:
Position middle pole so
that the warning label is on
the same side as the 11/32"
(.87cm) diameter holes of
the top pole.
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM) MINIMUM
OVERLAP.
NOTE: