Sharp PG-D3550W - Manual (Page 24)

20
Setting Up the Projector (Continued)
Projection (PRJ) Mode
The projector can use any of the 4 projection modes shown in the diagram below. Select the
mode most appropriate for the projection setting in use. (You can set the PRJ mode in “SCR-
ADJ” menu. See page
49 .)
Table mounted, front projection
[Menu item
➞ “Front”]
Table mounted, rear projection
(with a translucent screen)
[Menu item
➞ “Rear”]
■
■
Ceiling mounted, front projection
[Menu item
➞ “Ceiling + Front”]
Ceiling mounted, rear projection
(with a translucent screen)
[Menu item
➞ “Ceiling + Rear”]
■
■
a Ceiling-Mount Setup
It is recommended that you use the optional Sharp ceiling-mount adaptor and unit for this
installation. Before mounting the projector, contact your nearest Sharp Authorized Projector
Dealer or Service Center to obtain the recommended ceiling-mount adaptor and unit (sold
separately).