Questions & answers – Siemens CXT70 User Manual
Page 126
©
Siem
ens AG
2003, C
:\Siem
ens
\P
ro
dukte\CX70\output\FUG
\CX70_FUG_
en_040910_
rs_pk_druck\UL
YR_
FAQ.fm
125
Questions & Answers
VAR Langua
ge: en; V
A
R issue
date: 040728
right page (125)
of CX70 Retail fug en, A31008-H7103-A1-1-7619 (14.09.2004, 10:44)
Questions & Answers
If you have any questions about using your phone, visit us at
anytime. For additional help, we have
listed below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network
provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at
. Siemens will then send you the
configuration messages. Please follow the instructions contained in those messages.
Problem
Possible causes
Possible solution
Phone cannot be
switched on.
On/Off key not pressed long
enough.
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in the dis-
play.
Battery contacts dirty.
Clean contacts.
See also below under “Charging
error”
Too little standby
time.
Frequent use of organiser and
games.
Restrict use if necessary.
Fast search activated.
Deactivate speed search(p. 96).
Display illumination on.
Switch off display illumination (p. 80).
Unintentional keystrokes
(illumination!).
Activate key lock (p. 93).
Charging error
(charge icon not
displayed).
Battery totally discharged.
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temperature out of range:
+5 °C to +45 °C.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and telephone connection
socket, clean them if necessary, then insert battery
again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Only use original Siemens accessories.
Battery faulty.
Replace battery.