Setup satellite – Samsung SFT-202 User Manual

Page 19

Setup Satellite:

If your desired satellite position is not on the Preset List, you can manually edit an existing satellite or
add a new satellite name to the preset list.

To add a new satellite to your list, you must first enter the channel tuning mode:

Press Menu, Channel Setup, OK:

From the Channel tuning menu press F1
to enter manual tuner mode.

You will now see a Setup Satellite button on
the right hand side.

Highlight the Setup Satellite button, press OK.

You will now see the Setup Satellite menu:

In the Setup Satellite menu you may either
press F1 to edit the highlighted satellite details,
or you may press F2 to add your own satellite
to the listing.

In either case you will then be required to enter
the new parameters in the boxes provided:

Satellite: Enter the satellite name
Position: Enter the satellite position in degrees,
then the decimal place and either E or W (East
or West).

Press OK when finished. Your new satellite will
be added to the Manual list on the screen.

Highlight the new satellite in the list and press
OK to return to the Channel tuning menu. You
will find your new satellite displayed in the
Satellite box.

Enter the transponder parameters and check
for signal availability.

Commence downloading your new channels.

Now any manual channels downloaded under
these parameters will be listed under the satellite
name you have entered.

Note:
In the Manual Tuning Menu, you can use the F2
key to toggle between the receiver”s preset satellite
list and the manually added satellite list.

Réseau Bouquet

FTA

Signal

Data

Satellite

Position .

TV Radio

Number of services

F1 –Edit’deeails F2 - Add

ABC

Astra 19.2 E

Sirius 1 / 2 50.E

Use to change satellite

LNB
Preset
Satellite

Frequence
Sym. Rate
Polarity

FEC

Setup Satellite

11720
27500

Hor 18v

3/4

Auto Network Bouquet PIDs

FTA

Off

Signal

Data

F1 – Manual 2 - Mode

123 5 E

Astra – 19.2E