Scientific Atlanta Webstar DPX100 - Manual (Page 9)

9
WebSTAR Cable Modem Front Panel
1 POWER Illuminates solid green to indicate that power is being applied to the cable
modem
2 PC Illuminates solid green to indicate that an Ethernet/USB carrier is
present
Blinks to indicate that Ethernet/USB data is being transferred between
the PC and the cable modem
3 DATA Blinks to indicate that data is being transferred between the modem and
the cable network
4 CABLE Illuminates solid green when the modem is registered on the network and
fully operational. This indicator blinks to indicate one of the following
conditions:
• The cable modem is booting up and not ready for data
• The cable modem is scanning the network and attempting to register
• The cable modem has lost registration on the network and will continue
blinking until it registers again
• Blinks very slowly (once every 5 seconds) to indicate that Cable Modem
Access Protection is enabled
Note: Once the cable modem is successfully registered on the network, the
POWER and CABLE indicators illuminate continuously to indicate that the
cable modem is active and fully operational.
See Detailed Front Panel Indicator Functions later in this guide for more
information on front panel indicator functions.
Front Panel Indicators
POWER
PC
DAT
A
CABLE
1
2
3
4
T9916