Scientific Atlanta Webstar DPX100 - Manual (Page 13)

13
TCP/IP Configuration,
continued
10. Click the Gateway tab and verify that these
fields are empty. If they are not empty,
highlight and delete all information from the
fields.
11. Click the DNS Configuration tab, and then
select Disable DNS.
12. Click OK. The Copying Files window opens.
13. When the system finishes copying the files,
click OK.
14. Close all networking windows.
15. When the System Settings Change dialog box
opens, click YES to restart your computer.
Renewing the IP Address for Windows 95/98/98SE/ME
If your PC cannot access the Internet after the
cable modem is online, it is possible that your
PC did not renew its IP address. Follow these steps
to renew the IP address on your PC.
1. Click Start, and then click Run to open the
Run window.
2. Type winipcfg in the Open field, and click
OK
to execute the winipcfg command. The IP
Configuration window opens.
3. Click the down arrow to the right of the top
field, and select the Ethernet adapter that is
installed on your PC. The IP Configuration
window displays the Ethernet adapter
information.
4. Click Release, and then click Renew. The IP
Configuration window displays a new IP
address.
5. Click OK to close the IP Configuration window.
Note: If you have Windows 2000, Windows
NT, or Windows XP, consult your User’s
Manual for the procedure for renewing the IP
address on your PC.