Specifications, Emission control (exhaust, Evaporative) – Shindaiwa X7502863700 User Manual
Page 6: Epa 2010 and later and/or c.a.r.b. tier iii
6
Specifications
Specifications are subject to change without
notice.
Emission Control Label (located on Engine) (EXAMPLE ONLY, information on label varies by FAMILY).
PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)
The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine
emissions output meets applicable emissions regulations, provided that approved maintenance procedures are
followed as listed in the Maintenance Section of this manual.
Emission Control (exhaust
&
evaporative)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank
the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to
California models only.
Model
HT231-30
HT231-40
Engine Type
2-cycle, horizontal cylinder, air cooled
Engine Bore x Stroke
32 mm x 28 mm (1.26 in x 1.10 in.)
Engine Displacement
22.5cc (1.37 in
3
)
Unit Weight, Less Fuel
5.9 kg (13.0 lb)
6.4 kg (14.1 lb)
Unit Dimensions (LxWxH)
1080 x 250 x 240 mm (42.52 x 9.84 x 9.45 in)
1410 x 250 x 240 mm (55.51 x 9.84 x 9.45
in)
Fuel Tank Capacity
.53 liter (18.0 oz.)
Fuel/oil ratio
50:1 with *ISO-L-EGD or JASO FD class 2-cycle Mixing Oil
Carburetor
Diaphragm type
Ignition
Fully electronic, transistor controlled
Spark Plug
NGK BPMR6A
Electrode Gap
.6 mm (.024 in)
Torque
150-170 kgf • cm / 130-150 in • lbf
Air Cleaner
Foam element
Muffler Type
Spark arrestor muffler or spark arrestor muffler with catalyst
Starting Method
Recoil type
Stopping Method
Slide switch,grounding type
Blade Length
740 mm (29.13 in)
1060 mm (41.73 in)
Blade Type
Double-blade cutting action: single-edged blade
Clutch Type
Centrifugal clutch, dry-type
Gear Type
Spur gears
Gear Lubrication
Lithium-based grease
Standard Equipment
Rear handle w/integral controls, anti-vibe mountings, front handle w/guard, tool set, blade cover.
Idle Speed (RPM)
3,000
Clutch Engagement Speed (RPM)
4,100
Wide Open Throttle (RPM)
11,000
IMPORTANT
This spark ignition system complies with the Canadian standard ICES-002.