Shindaiwa X7502863700 - Manual (Page 4)

4
HOT SURFACE ON-OFF Switch
Throttle
Interlock
Protector
CAUTION READ AND
FOLLOW THE
INSTRUCTIONS
IN THE
OPERATORS
MANUAL.
WEAR EYE
AND HEARING
PROTECTION
AT ALL TIMES
DURING
OPERATION.
THE BLADES
ARE SHARP!
HANDLE WITH
CARE.
KEEPS HANDS
CLEAR OF
CUTTER
BLADES WHEN
STARING THE
ENGINE.
IMPORTANT!
Caution, Danger, Warning, and Operation Information
Labels: Make sure all information labels are undamaged
and readable. Immediately replace damaged or missing
information labels. New labels are available from your local
authorized Shindaiwa dealer.
Safety devices and labels
Safety (continued)
Operating the Hedge Trimmer
ALWAYS wear eye, ear,
and hand protection while
operating this unit!
ALWAYS protect yourself from hazards
such as thorny brush and flying debris
by wearing gloves and close fitting
clothing that covers arms and legs.
Never wear shorts. Don’t wear loose
clothing or items such as jewelry that
could get caught in machinery or
underbrush. Secure long hair so it is
above shoulder level.
USE EXTREME CAUTION
when operating near fences
or electric wiring.
NEVER cut metal objects
or wire with the blade.
ALWAYS stop the engine and install
the blade cover before moving to
another work site, and maintain a firm
footing while operating or carrying the
trimmer.
ALWAYS stop the engine before
removing branches or debris from
the cutters! Never allow the cutters
to contact buildings or other hard
objects!
AVOID using or storing this unit in a wet
environment. Water on the cutters may
enter the gearcase and damage your unit.
ALWAYS keep proper footing and do
not overreach. Maintain your balance at
all times during operation.
NEVER operate this unit if the
safety guard has been removed or
damaged!
NEVER allow children to use
the unit. Avoid operating near
bystanders.
AVOID cutting large or extremely
“woody” branches. Doing so can shorten
cutter life, and may also damage the
gearcase.
ALWAYS grip support handle
with right hand and throttle
handle with left hand.
Blade Cover