Equalizer settings, Recording settings – Samsung YP-910 User Manual
Page 30
58 - Samsung Napster YP-910 Player
Samsung Napster YP-910 Player - 59
Settings
Rpt/Shuffle - Repeat One
EQ - Rock
Record Settings
Backlight - 1 sec
Contrast - 3
Reset
About
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to
select Settings, and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select EQ.
2
Press the SELECT button until the desired mode appears.
● Select the desired mode, and then press the MENU button to go to the main menu.
Off
➔
Rock
➔
Pop
➔
Classical
➔
Jazz
➔
Bass Boost
3
Equalizer Settings
Recording Settings
Sampling Rate - 44 Khz
Bit Rate - 128 Kbps
Monitor Volume - On
Settings
Now Playing
Library
FM Radio
Settings
FM Transmitter
Menu
Rpt/Shuffle - Repeat One
EQ - Rock
Record Settings
Backlight - 1 sec
Contrast - 3
Reset
About
In the Menu, use the SCROLL UP/SCROLL DOWN buttons to select
Settings, and then press the SELECT button.
1
Use the SCROLL UP/SCROLL DOWN buttons to select Record
Settings, and the press the SELECT button.
2
Use the SCROLL UP/SCROLL DOWN buttons to select Sampling Rate, Bit Rate, and Input
Level, and then briefly press the SELECT button to make the desired recording setting.
● Complete the desired setting, and then press the MENU button to go to the main menu.
●
Sampling Rate: Each time the SELECT button is pressed, the selection toggles
between 32KHz and 44KHz.
●
Bit Rate: Each time the SELECT button is pressed, the selection changes as follows:
96
➔
128
➔
160Kbps.
●
Monitor Volume: Each time the SELECT button is pressed, the selection toggles
between On and Mute.
3
Recording Settings
910-eng-new 9/26/03 10:35 AM Page 58