Sharp Notevision XR-50S - Manual (Page 34)

30
Resize Mode
This function allows you to modify or customize the Resize mode to enhance the input
image. Depending on the input signal, you can choose a desired image.
Press RESIZE.
See page 46 for setting on menu screen.
COMPUTER
Main resolution NORMAL FULL NATIVE BORDER 16:9
XR-55X
SVGA (800 Ч 600)
1024 Ч 768 —
800 Ч 600
768 Ч 576
1024 Ч 576
XGA (1024 × 768) —
SXGA (1280 Ч 1024) 968 Ч 768
1024 Ч 768
1280 Ч 1024
1280 Ч 800 1024 Ч 640 1280 Ч 800 922 Ч 576
XR-50S
SVGA (800 Ч 600)
800 Ч 600 —
—
600 Ч 450
800 Ч 450
XGA (1024 Ч 768) 1024 Ч 768
SXGA (1280 Ч 1024) 750 Ч 600
800 Ч 600
1280 Ч 1024
1280 Ч 800 800 Ч 500 1280 Ч 800 720 Ч 450
Input signal For 4:3 screen For 16:9 screen
Computer
Image type NORMAL FULL NATIVE BORDER 16:9
XR-55X XR-50S
Resolution
lower than
XGA
Resolution
lower than
SVGA
4:3 aspect ratio
—*2
*1, *3 *1
XGA SVGA —*2
Resolution
higher than
XGA
Resolution
higher than
SVGA
SXGA (1280 × 1024)
5:4 aspect ratio
1280 × 720
16:9 aspect ratio
*1
—*2 —*2
1360 Ч 768
1366 Ч 768
1280 Ч 768
16:10 aspect ratio
*1 *1 *1
1280 × 800
: Cutout area on which images cannot be projected
: Area where the signals are off screen
*1 The Image Shift function can be used for these images.
*2 Same as NORMAL mode
*3 For XR-50S model, “Border” cannot be selected with certain resolution selections in which the horizontal part of aspect ratio
becomes smaller than 4:3 (such as 1280 × 1024, among others).
• RESIZE
button RESIZE
button
Image Projection (Continued)