Siemens 5551 - Manual (Page 22)

IMPORTANT INFORMATION
body of the burner.
sealed. Figure 4.
The adjustment of primary air must not be performed
on these burners.
From natural gas to propane
It is necessary that all operations related with
of our Technical Service, and that the regulations
in force, as well as the requisites of the gas
companies, be followed.
IMPORTANT: Before you begin, turn off the gas
and electricity supply to the appliance.
Before connecting up the appliance to the
installation, first check that it has been adjusted
for the type of gas that is to be supplied. Our
to operate with the gas type indicated on the
specifications plate.
A)
T ABLE 1
Burner data
Gas type changing:
1 - Remove the grates, covers and the main
installation, adjustment or adaptation LP
gas be performed by authorized personnel
The propane gas tank must be equipped with its
own high pressure regulator in addition to the
pressure regulator supplied with this unit.
The maximum supply pressure to this appliance
procedures must be completed:
with LP gas. To do so, the following
shall not exceed 14" water column (34.9 mbar).
cooktops are delivered from factory prepared
This cooktop can be adapted to work
S
1).
Supply Pressure
Natural Gas - 7" wc (17.5 mbar) minimum.
Propane Gas - 11" wc (27.4 mbar) minimum.
NATURAL
6” 10”
auxiliar
(Hs)
(Hs)
(Hs)
BTU/hr
BTU/hr
BTU/hr
BTU/hr
110
138 91
9.800 9.800
76
6.500 6.500
85 60
3.900 3.900
20.000 20.000
gases indicated on the
GAS
TYPE
PROPANE
Burner
rapid
The burner must be used with the
semi-
rapid
Burner
Large
Burner
Burner
double
flame
Rated
Burner tip marker
Gas pressure for use
Rated
Consumption
Consumption
Burner tip marker
Rated Consumption
Burner tip marker
Rated Consumption
184/ X 129/
Distance "Y" inner
bushing
(Hs)
Distance "Z" outer
Burner tip marker
bushing
specifications plate.
2 - Change the burner tips using the spanner
provided by our technical services department
(code 424699) and make sure that they are
tightened all the way in order to ensure that
they are correctly
20
ee table (
Change of rapid, semi-rapid and auxiliary
cooktop burner tips.
Fig. 4