Sennheiser SK 300 - Manual (Page 23)

Adjusting settings via the operating menu
22
The name can be displayed on the standard displays
“
Frequency/Name ” and “ Name/Frequency bank/Channel ”.
The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Activating/deactivating the automatic lock mode –
“Auto Lock”
The lock mode prevents that the bodypack transmitter is
accidentally switched off or programed during operation.
The lock mode icon
ቦ
on the current standard display
indicates that the lock mode is activated.
For information on how to use the lock mode, refer to
page 12.
The extended menu “ Advanced Menu ”
Setting transmission frequencies and frequency banks –
“Tune”
Via the “ Tune ” menu item, you can set a transmission
frequency to be stored in the current channel or you can
select a different channel in one of the frequency banks
“
U1 ” to “ U6 ” and assign this channel a transmission
frequency.
̈
Press the rocker button to select a character.
̈
Press the SET button to change to the next
segment/character or to store the complete
entry.
̈
Press the rocker button to select the desired
setting.
When you have selected one of the system banks
and then select the “
Tune ” menu, the bodypack
transmitter automatically switches to channel 1 of
the frequency bank “
U1 ”. In this case, “ U1.1 ” briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks
“
U1 ” to “ U6 ” are not assigned a transmission
frequency.
When you are in the “ Tune ” menu item, the
RF signal is deactivated.
Active
Auto Lock Active
Auto Lock
Inactive
Auto Lock Menu
Call up “Auto
Lock” Select the desired
setting Store the setting
“Stored”