Sennheiser SK 300 - Manual (Page 10)

Putting the bodypack transmitter into operation
9
̈
Connect the 3.5 mm jack plug
ƻ
from the Sennheiser
microphone or line cable to the 3.5 mm jack socket
MIC / LINE
³
.
̈
Lock the 3.5 mm jack plug by screwing down the
coupling ring
Ƽ
.
̈
Via the operating menu, adjust the sensitivity of the
microphone/line input (see page 20).
Attaching and positioning the microphones
ME 2
̈
Use the microphone clip
ƽ
to attach the microphone to
clothing (e.g. tie, lapel).
̈
Attach the ME 2 microphone as close as possible to the
sound source.
The ME 2 clip-on microphone has an omni-directional pick-
up pattern. It is therefore not necessary to position it
precisely.
ME 3
̈
Adjust the ME 3 headmic so that a comfortable and
secure fit is ensured.
The ME 3 headmic has a cardioid pick-up pattern.
̈
Position the microphone so that its sound inlet is
directed towards the sound source (e.g. mouth).
³
Ƽ
ƻ
ƽ