Sennheiser SK 300 User Manual
Page 22
Adjusting settings via the operating menu
21
The following figures are a guide to the best settings:
Selecting the frequency bank and the channel manually –
“Frequency Preset”
Overview of the frequency banks and channels:
Entering a name – “Name”
Via the “
Name
” menu, you can enter a freely selectable
name (e.g. the name of the performer) for the bodypack
transmitter.
Transmission situation
Sensitivity setting
Loud music/vocals
−30 to −21 dB
Presentations
−21 to 0 dB
When you are in the “
Frequency Preset
” menu item,
the RF signal is deactivated.
Frequency
bank
Channels
Type
“
1
” to “
20
”
up to 24 per
frequency
bank
System bank:
frequencies are factory-
preset
“
U1
” to “
U6
” up to 24 per
frequency
bank
User bank:
frequencies are freely
selectable
When setting up multi-channel systems, please
observe the following:
Only the factory-preset frequencies within one
frequency bank are intermodulation-free (see
page 27).
Bodypack transmitter and receiver of a transmission
link have to be set to the same frequency.
̈
It is vital to observe the notes on frequency
selection on page 27.
Menu
B.Ch: 1. 1
Frequency Preset
B.Ch:
Frequency Preset
1
. 1
B.Ch:
Frequency Preset
20.
1
518.200 MHz
531.375 MHz
Call up “Frequency
Preset”
Select the frequency
bank and confirm
Select the channel;
store the setting
“Stored”
Menu
Lichael
Name
Name
Name
L
ichael
M
i
chael
Call up “Name”
Enter a character
and confirm
Enter a character;
store the setting
“Stored”