Samsung C770BS-XAC - Manual (Page 37)

37
ENG
●
SETUP
SETTING THE TEST TONE
Use the test tone to check the speaker connection status or level.
Press the SETUP/MENU button.
Each time the button is pressed, the mode switches between SETUP
ENTER and SETUP OFF.
Press the ENTER button to select SETUP ENTER.
Press the ▲▼ buttons to select TEST TONE, and then press the ENTER
or ► button.
Press the ▲▼ buttons to select the option you want, and then press the
ENTER or ► button.
AUTO : Test signal will be automatically output as follows; F.L Æ CEN
Æ S.W Æ F.R Æ S.R Æ SBR Æ SBL Æ S.L.
- During test tone output, press the ▲▼ buttons to adjust the speaker
output level from -10 to +10 dB by 1 step.
MANUAL : Enables you to adjust the output level of the speaker
manually.
1) Press the ENTER button to select the speaker you want.
Each time you press the ENTER button, F.L Æ CEN Æ S.W Æ F.R
Æ S.R Æ SBR Æ SBLÆ S.L will be selected in turn.
2) Press the ▲▼ buttons to set the Test Tone mode you want.
You can adjust the speaker output level from -10 to +10dB by 1 step.
The sound gets quieter at -10dB and louder at +10dB.
- Test Tone Output -
• F.L (front left) : -10 ~ +10dB • CEN (center) : -10 ~ +10dB
• F.R (front right) : -10 ~ +10dB • S.W (subwoofer) : -10 ~ +10dB
• S L (surround left) : -10 ~ +10dB • SBL (surround back left) : -10 ~ +10dB
• S.R (surround right) : -10 ~ +10dB • SBR (surround back right) : -10 ~ +10dB
- To stop test tone -
Press the SETUP/MENU button once.
SETUP OFF appears on the display and test tone stops.
In the Dolby Pro Logic IIz mode; Test signal will be automatically output as follows : F.L Æ FHL Æ CEN Æ
S.W Æ FHR Æ F.R Æ S.R.
1.
•
2.
3.
4.
•
•
•
M

Ж
Ж
Ж
Ж
HW-C700-C770S-C770BS-XAC_0616.in37 37 HW-C700-C770S-C770BS-XAC_0616.in37 37 2010-06-17 10:08:01 2010-06-17 10:08:01