Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 39)

g To install batteries in the remote control
1. Press the tab on the underside of the remote control, and then open the cover.
2. Remove the batteries if they are present.
3. Insert two new 1.5V AA batteries in the remote control. Ensure the + and - markings on the
batteries align with the markings in the remote control.
4. Replace the cover.
Infrared remote control sensor
The infrared remote control sensor is
located on the front control panel. It
enables you to control your interactive flat
panel from an angle of 30º and within a
distance of 23' (7 m) using the included
remote control.
I M P O R T A N T
The remote control might not function
when the infrared remote control sensor
is blocked or when it is in direct sunlight
or strong lighting.
C H A P T E R 5
Using your interactive flat panel
31