Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP - Manual (Page 23)

Connecting a room control system
You can control your interactive flat panel from a room control system.
g To connect your interactive flat panel to a room control system
Connect an RS-232 cable from the room control input on the inside terminal panel of the
interactive flat panel to the serial output on your computer or room control system.
I M P O R T A N T
Do not use a null modem cable. Use only a standard RS-232 cable.
For more information about setting up and programming a room control system, see Remotely
managing your SMART Board 8055i interactive flat panel ( smarttech.com/kb/170189 ).
C H A P T E R 3
Connecting computers and peripheral devices
15