Chapter 2: installing your interactive flat panel, Environmental requirements, Chapter 2 – Smart Technologies Smart Board 6055i/8055i SMP/8055ie-SMP User Manual
Page 17
Chapter 2:
Installing your interactive flat
panel
Wall-mounting your interactive flat panel
Important mounting considerations for trained installers
You need a team of professional installers to install your SMART Board 8055i interactive flat panel.
This chapter provides additional considerations and details for installing your interactive flat panel.
I M P O R T A N T
Because the receptacles might not be accessible after wall-installation, consider connecting cables
for speakers, computers and peripheral devices while the interactive flat panel is still in its
packaging or is suspended from a lifting device. For more information, see Connecting computers
and peripheral devices on page 13.
Environmental requirements
Before installing your interactive flat panel, review the following environmental requirements. For
more detailed information, see SMART Board 8055i and 8055i-SMP interactive flat panel
specifications
or SMART Board 8055ie-SMP interactive flat panel with
appliance specifications
.
Environmental requirement
Parameter
Power requirements
0.8A to 1.8A at 100V to 240V AC, 50 Hz to 60 Hz
Power consumption at 77ºF
(25ºC)
Typically up to 148 W (brightness at 80% and volume at 50),
maximum 178 W (brightness and volume at maximum)
Operating temperature
41°F to 95°F (5°C to 35°C)
Chapter 2
9