Siemens M1 - Manual (Page 60)

59
GSM M1 Module, English: A24859-N4000-A100-1-7677 gsm-m1-e.fm
Technical reference section
6.3.96
This command allows you to store a short message in the memory . The
memory location is returned in .
Action command syntax
This command allows you to delete a short message from at the location dex>.
Action command syntax
This command allows you to determine how the TE will be notified when a short mes-
sage is received from the network, when the TE is activated.
Parameter Command Syntax
Sets result code indication routing for SMS-STATUS-REPORTS.
Defines the handling method for buffered result codes when
1,2 or 3 is enabled.
AT+CMGW - Write message to memory
Command Possible response(s)
If PDU mode (+CMGF=0):
+CMGW= [,]PDU
is given +CMGW: ,
+CMS
ERROR :
+CMGW=?
AT+CMGD - Delete message
Command Possible response(s)
+CMGD= +CMS ERROR :
+CMGD=?
AT+CNMI - New message indications
Command Possible response(s)
+CNMI=[[,[,[,
[,]]]]] +CMS ERROR :
+CNMI? +CNMI: ,,,
+CNMI=? +CNMI: (list of supported s),
(list of supported s) , (list of sup-
ported s) , (list of supported
s) , (list of supported s)