Siemens M1 User Manual
Page 34
33
GSM M1 Module, English: A24859-N4000-A100-1-7677
gsm-m1-e.fm
Technical reference section
6.3.96
Example:
Enter:
AT+CEER
GSM module:
+CEER: 10,08
OK
If an error occurs while you are processing a command by means of AT+C, the problem
may be located in the data or GSM section of the M1. For example, if a data connection
is set up, the phonebook cannot be accessed at the same time. Or is the problem in
the SIM card? Is it inserted or has the PIN been omitted? Extended error messages
help you isolate errors more easily. However, you must first enable these messages
from the PC using this command.
AT+CMEE - Report mobile equipment error
AT+CMEE
Option
Result
AT+CMEE=
Resets the mode.
AT+CMEE?
Displays the way in which error messages are reported
to the PC.
AT+CMEE=?
Displays the modes supported by the M1 in the form of
a complete list of the values that can be assumed by
n= [0..2]
0
The error messages are not interpreted but, generally, only an ERROR
code is returned.
1
When an error occurs, an extended message to the PC is generated that
specifies the cause of error as a number.
2
Same as “1“ except that the error is output as text.