Store control code, Addressbook – Siemens SL45 User Manual
Page 24
25.4.01
u35gb.fm
U35 /SL45- English, A31008-H4800-A2-3-7619
22
Addressbook
Move (storage location)
An entry may be moved to other
storage locations:
SIM
Address entries on the SIM card
only take the form of last name and
phone number.
Mobile (phone memory)
p
Address entries only take the form
of last name, first name and phone
number.
If the SIM card is full, further entries
are automatically kept in the
memory.
Protected SIM
*
Part of the SIM memory can be pro-
tected by PIN 2. Depending on the
SIM card, dialling can be limited to
these phone numbers. For editing,
PIN 2 is needed (see p. 61).
Store control code
You can store phone numbers and
control codes (digits) in the
Addressbook as standard
Addressbook entries (for operating
an answering machine by remote
control, for example).
+
Dial number.
Hold down until “+“
appears on the display
(pause for connection
setup).
_
+
Enter control code (digits).
If necessary enter other
pauses of three seconds
each to ensure correct
processing at the
destination.
Press and enter a name
and, if necessary, further
details.
6DYH
Save entry.
You can also store the control code
(digits) like a phone number and
send it during a call (see p. 17).
Extending numbers
Using an external PC program such as
Microsoft®Outlook®, parts of a number
can be replaced by “?”and can then be
transferred to the Addressbook
(for company numbers for example).
To call:
7
Open Addressbook and select
(partial) number.
"
Press.
+
Replace “?” with digits.
"
Dial
number.
Synchronising with Outlook®
You can synchronise your Addressbook with
your Outlook
®
database using Siemens
QuickSync software (see p. 71).