Samsung V70 - Manual (Page 29)

29
GB
Auto Power Off
The Auto Power Off feature automatically turns off your DVD-VCR
if no signal is received and you do not press any button for the
selected time.
1 After pressing the MENU, press the OK or Š .
Result:
The Setup menu is displayed.
2 Press the corresponding › or ‚ buttons, until the Auto Power
Off option is selected.
3 Press the OK or Šbuttons, until you select the time of Auto Power
Off interval.
Off 1Hour 2Hour 3Hour
4 On completion, press RETURN twice to exit the menu.
Language : English
User Set
Screen Messages : On
Install
Auto Power Off : Off
Off
1Hour
2Hour
3Hour
To prevent delays or over-runs the VCR has a function called G-
CODE EXTEND allowing you to extend the recording time by up to
60 minutes.
1 After pressing the MENU, press the OK or Š .
2 Press the corresponding › , ‚ buttons to select the User Set
option.
3 Press the OK or Šbuttons to select this option.
Result:
The User Set menu is displayed.
4 Press the corresponding › or ‚ buttons, until the
G-Code Extend option is selected.
5 Press the OK or Š buttons to set the G-Code Extend time by
increments of 10 minutes.
6 To turn off, press OK or Š buttons repeatedly until Off shows.
G-CODE Extend
★
(DVD-V80/DVD-V85 Only) VCR
Colour System : Auto
IPC : On
G-Code Extend : Off
User Set
Colour System : Auto
NICAM : On
IPC : On
G-Code Extend : Off
User Set
Australia Model
Newzealand Model
Off
10
20
30
40
50
60
Off
10
20
30
40
50
60
VCR
00169N DVD-V70/XSA-GB2 11/14/05 10:11 AM Page 29