Servis-Rhino 4211B - Manual (Page 45)

ASSEMBLY
4211B 02/10 Assembly Section 3-11
© 2010 Alamo Group Inc.
ASSEMBL
Y
Installing Quick Attach Device
Always use a drift and hammer made of non-sparking material (a shot-filled mallet is
recommended) to install or remove pins. A steel hammer or drift could generate flying metal
fragments and result in injury. Always wear safety glasses when using a hammer to remove
or install pins.
3. Fasten quick attach device to lower boom arms and bucket tilt cylinders using 1” x 4-3/8” anti-rotation pins,
3/8” x 3/4” shoulder bolts, and 3/8” lock nuts (supplied with loader). Figure Asm-L-0014_B.
4. Attach bucket leveling rod indicator (supplied with loader), to outside of right ear on quick attach as shown.
Figure Asm-L-0014_B. Secure bucket leveling rod indicator with two 1/8” x 1” cotter pins (supplied with
loader).