beautypg.com

Before using your home theater, Disc playback – Samsung HT-TX45 User Manual

Page 13

background image

ENG

25

OPERA

TION

Disc Playback

1

Press the

OPEN/CLOSE

button to open the disc tray.

2

Load a disc.

Place a disc gently into the tray with the disc’s label facing up.

3

Close the compartment by pressing the

OPEN/CLOSE

button again.

Playback starts automatically.

• Depending on the content of the disc, the initial screen may appear different.

Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection system) rec-
ommendations.

To stop playback, press the

STOP (

)

button during playback.

If pressed once, is displayed and the stop position will be stored in memory.

If the

PLAY/PAUSE (

)

button or

ENTER

button is pressed, playback resumes from the stop position.

(This function works only with DVDs.)

If pressed twice, is displayed, and if the

PLAY/PAUSE (

)

button is pressed, playback starts from

the beginning.

To temporarily pause playback, press the

PLAY/PAUSE

(

)

button during playback.

To resume playback, press the

PLAY/PAUSE (

)

button again.

24

Before Using Your Home Theater

To Operate your Samsung TV and the Home Theater with the HT-X30/HT-TX35's Remote Control

1

Plug the main unit's power cord into the AC power supply.

Before plugging your system into a main socket, you must check the voltage setting.
If the voltage of the socket does not correspond to the setting on the rear of the unit, you
may seriously damage your system.

2

Press the

TV

button to set the remote to TV mode.

3

Press the

POWER

button to turn on your Samsung TV

with this remote.

4

Press the

TV/VIDEO

button to select VIDEO mode on your TV.

5

Press the

DVD RECEIVER

button to switch to DVD RECEIVER mode to

operate the DVD Home Theater

6

Press the

FUNCTION

button on the main unit or

DVD

button

on the remote to enable DVD/CD playback.

Press and hold the

NT/PAL

button on the remote controller for over 5 seconds

while the power is turned off.

By default, the video format is set to .

or will appear in the display. At this time, press the

NT/PAL

button shortly to

select between and .

Each country has a different video format standard.

For normal playback, the video format of the disc must be the same as the video format of your TV.

Selecting the Video Format

VIDEO

The DVD Home Theater's remote can be used to control Samsung TVs.

DVD

VCD

CD

X30_TX35(1~39P) NOGB 2007.4.10 10:35 AM Page 24

This manual is related to the following products: