Studer Innotec XTH 3000-12 User Manual
Xtender, Installation and operating instructions
Table of contents
Document Outline
- 1 Introduction
- 2 General information
- 3 Assembly and installation
- 4 Cabling
- 4.1 Choice of system
- 4.2 Earthing system
- 4.3 Recommendations for dimensioning the system
- 4.4 Wiring diagrams
- 4.5 Connecting the battery
- Connecting the battery (Xtender side)
- 4.5.2 Internal fuse for the Xtender
- 4.5.3 battery-side connection
- 4.5.4 Earthing the battery
- 4.5.5 Connecting the consumers at the 230 V AC output
- 4.5.6 Connecting the AC supply sources
- 4.5.7 Wiring auxiliary contacts
- 4.5.8 Connecting the communications cables
- 4.5.9 connecting the temperature sensor (BTS-01)
- 5 Energisation of the installation
- 6 Description and functioning
- 6.1 Circuit diagram
- 6.2 Description of the main functions
- 6.2.1 Inverter
- 6.2.2 Automatic load detection
- 6.2.3 Transfer relay
- 6.2.4 Battery charger
- 6.2.5 Battery charger
- 6.2.6 Limiting the input current by limiting the charger current
- 6.2.7 The inverter as source backup (“smart boost” function)
- 6.2.8 Xtender protection
- 6.2.9 Auxiliary contacts
- 6.2.10 The real time clock
- 6.2.11 Remote control via dry contact
- 6.3 Multi-unit configurations
- 6.4 Accessories
- 7 Control
- 8 Maintenance of the installation
- 9 EC declaration of conformity
- 10 Figure comment tables
- 11 Figure element tables
- 12 Control and display parts for the Xtender (fig. 4b)
- 13 Type plate elements (fig. 3b)
- 14 Table of standard configurations
- 15 Technical data