Sony 3-875-814-21(1) - Manual (Page 64)

64 GB
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas (aerials) to the receiver
(page 42).
Tip
The tuning scale for direct tuning is shown below.
FM band
50 kHz
AM band 9 kHz
1
Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3
Press V/v repeatedly to select
“ FM” or “ AM,” then press
or b.
The FM or AM menu list appears on the
TV screen.
4
Press V/v to select “Auto
Tuning,” then press .
5
Press V/v.
Press V to scan from low to high, press v
to scan from high to low.
The receiver stops scanning whenever a
station is received.
In case of poor FM stereo
reception
1 Tune in the station you want to listen to
using Auto Tuning, Direct Tuning
(page 65), or select the preset station
you want (page 67).
2 Press OPTIONS.
The option menu appears.
3 Press V/v to select “FM Mode,” then
press .
4 Press V/v to select “MONO,” then
press .
Tuning
Refer to “Using Network Features”
supplied with these operating
instructions for details on listening to the
Internet radio.
AMP
V/v/b,
OPTIONS
MENU
Numeric
buttons
SHIFT
Tuning into a station
automatically (Auto Tuning)