Sony 3-875-814-21(1) - Manual (Page 145)

145 GB
U
s
ing O
n
-s
cr
een R
e
mot
e
(Qui
c
k
C
lic
k)
1
Press AMP.
The AMP button lights up, and then turns
off.
2
Press QUICK CLICK.
The on-screen remote is displayed on the
TV screen.
3
Press V/v/B/b to select MACRO
on on-screen remote.
The macro list appears on the TV screen.
4
Press V/v to select the macro
number you want to start.
The macro starts and executes the
commands in the order you assigned
them.
To input a macro name
1 Press AMP.
The receiver can be operated using the
remote.
2 Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or b.
4 Press V/v repeatedly to select “Quick
Click,” then press or b.
5 Press V/v repeatedly to select “Macro
Setup,” then press .
6
Press OPTIONS.
The option menu appears.
7 Press V/v repeatedly to select “Name
Input,” then press .
The soft keyboard appears on the TV
screen.
8 Press V/v/B/b and to select a
character one by one.
9 Press V/v/B/b to select “Finish,” then
press .
The name you entered is registered.
To cancel naming input
Press V/v/B/b to select “Cancel,” then press
.
To erase a programmed macro
1 Press AMP.
The receiver can be operated using the
remote.
2
Press MENU.
The menu is displayed on the TV screen.
3 Press V/v repeatedly to select
“ Settings,” then press or b.
4
Press V/v repeatedly to select “Quick
Click,” then press or b.
5 Press V/v repeatedly to select “Macro
Setup,” then press .
6 Press V/v repeatedly to select the
macro number you want, then press
.
7 Press V/v repeatedly to select the step
number you want, then press .
8 Press V/v repeatedly to select “–” as a
component name, the press .
9 Repeat steps 8 and 9 to clear the
stored macro.
10 Press V/v repeatedly to select “Finish.”
Settings stored as a macro are cleared.
Starting macro play