Sirius Satellite Radio SIRIUS STILETTO 10 User Manual

Page 9

Sanyo CRSR-10 User Guide

Searching for a Channel Preset (P.TUNE Mode)

It is possible to quickly search through all of
your presets using the CHANNEL Button.
1. Press and hold the BAND button to enter the

Preset Tuning Mode (P.TUNE).

2. The bottom right portion of the display will

change to highlight the current preset (bottom
right).

3. Press the CHANNEL Button in either direction

to move up or down through your presets. The
new channel will start to play as soon as you
stop pressing the CHANNEL Button.
• Only stored presets will be displayed,

regardless of what bank they are stored in.

• Presets will be grouped and displayed by

preset bank and number (ex. A-1, A-2...B-1,
B-2...) and rotate all the way around back to
the beginning.

Default Display

Preset Tuning List Mode

The P.TUNE Mode can also be viewed as a list
showing Channel Name, Artist Name, or Song Title
just like in the Channel List Mode:
1. Press and hold the BAND button to enter the

Preset Tuning Mode (P.TUNE) (top right).

2. Press the DISP button for 2-seconds which will

bring up the Preset Tuning List Mode displaying
up to 6 preset channel names.
• Pressing the DISP button while in this mode will

change between Channel Name (right top),
Artist Name (right middle), and Song Title list
modes (right bottom).

• The name field will scroll only if the length of the

artist or song title cannot be viewed in its
entirety.

3. Use the CHANNEL Button to highlight the desired

preset.

4. Push and release the SELECT Button to select the

preset. The channel will change and the display
will revert to the P.TUNE Display.

P.TUNE Display

Setting Channel Presets

You can store up to 20 of your favorite channels as
presets, for quick access. Presets are stored in 2
banks, A and B, each containing 10 channel presets.

1. Press the BAND button to activate the preset bank

you want. The selected bank is shown in the lower
right corner of the Default Screen.

2. Select the channel you want to preset (see Basic

Operation and Changing Channels on page 12).

3. Hold the numbered preset button you want to store

the channel in for at least 2 seconds.
• The selected preset number will flash and then

remain lit on the display to show that it has been
memorized.

• If the preset button already has a channel stored in

it, it will be replaced with the new channel.

Recalling Channel Presets

The 10 presets in the active bank (A or B) can be
selected by pressing the “0” – “9” buttons.
1. Press the BAND button to activate the preset bank

you want. The selected bank is shown in the lower
right corner of the Default Screen.

2. Press the desired preset button “0” – “9” to recall the

preset. The channel will change and the display will
revert to the Default Screen for the new channel.

P.TUNE
Channel Name
List Screen

P.TUNE
Artist Name
List Screen

P.TUNE
Song Title
List Screen

Preset Tuning
Mode