Sirius Satellite Radio SIRIUS STILETTO 10 User Manual

Page 15

Sanyo CRSR-10 User Guide

b. Clear All: Press and release the SELECT

Button; a prompt display screen appears
confirming - Clear All (Below). Select “Yes” or
“No” and press the SELECT Button.

To exit this function, press the SELECT Button or
MENU Button. No button activity for 10 seconds will
also exit this function.

Memory Options

In this mode, the user can turn the Memory Search
Function (S-SEEK) On or Off. In addition, all 20
Preset Memory Locations can be cleared. To change
the Memory Options, use the following procedure
while in the “Menu Options” List mode:

1. Use the CHANNEL Button to highlight the

“Memory Options”. Press the SELECT Button to
select.

2. Select one of the following Memory Options:

a. Auto Memory Search function - On or Off: Use

the CHANNEL Button to select between the 2
options by highlighting the desired selection
(TOP). Then press the SELECT Button to enter
the option.

• Time Zone: Since the Clock adjusts the

time automatically, it is important to specify
your proper time zone. Use the CHANNEL
Button to select the proper time zone. The
following is a list of time zones included:

(GMT -9:00) Alaska
(GMT -8:00) Pacific
(GMT -7:00) Mountain
(GMT -6:00) Central
(GMT -5:00) Eastern
(GMT -4:00) Atlantic
(GMT -3:30) Newfoundland (Abbreviated
as Newfndlnd)

• Daylight Saving Time (DST) Observance:

Activate this function if your area is subject
to DST; press the CHANNEL Button to
toggle between DST Observed (default) or
DST Not Observed.

b. Alarm Clock: When this menu option is

highlighted and selected, you will be able to
set the unit to turn on at a specific time. The
last selected channel prior to shutdown will
be present when the Alarm feature is
activated. Alarm appears on the first line of

Time Features

This Menu Option allows for adjustments of the
following items:

Clock

Auto Shutdown

Alarm Clock

Sleep Mode

Program Alert

To change the Time Features, use the following
procedure while in the “Menu Options” List mode:

1. Use the CHANNEL Button to highlight the “Time

Features”. Press the SELECT Button to select.

2. Use the CHANNEL Button to select one of the

following Time Features to adjust:
a. Clock: When entering this menu option, you can

setup the clock shown on the default display,
based on the format desired, and the time zone in
which you reside. The clock data is provided via
the Sirius Satellite data stream, and will update
based on the received signal.

• Format: The Clock Format option allows for
either 12 Hour (Default), or 24 Hour display
options. Use the CHANNEL Button to select the
desired format.