beautypg.com

Quick reference control operation, Quick reference control operation (continued), Part names – Sharp 27F641 User Manual

Page 8

background image

8

Dimension: 140mm x 215mm

Quick Reference Control Operation

Part Names

Quick Reference Control Operation (Continued)

Note:

• The LIGHT button on the Remote Control glows in the dark. To use the glow-in-the-dark display on the remote control, place

it under a fluorescent light or other lighting.

• When the LIGHT button is pressed, the shaded buttons above will light up.
• Using the LIGHT button frequently will shorten the battery life.
• Alkaline batteries are recommended for frequent use of the LIGHT button.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.

Basic Remote Control Functions

POWER
Press

→ On.

Press again

→ Off.

REMOTE KEYPAD
Accesses any channel from keypad.

FLASHBACK
Returns to previous channel.

PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 33.)

VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
• Changes or selects the TV

adjustments on On-Screen Display.

MENU
Press

→ Accesses MAIN MENU.

Press again

→ Exits MAIN MENU.

MUTE
Press

→ Mutes sound.

Press again

→ Restores sound.

• When sound is muted, CLOSED

CAPTION appears if available.

POWER (DVD/VCR)
Press

→ On.

Press again

→ Off.

DVD/VCR CONTROL
(See page 42.)

Infrared Transmitter Window

CATV/DVD-TV/VCR MODE buttons
Press TV/VCR

→ Signals sent will be for

TV and VCR control.
Press CATV/DVD

→ Signals sent will be

for cable TV converter and DVD control.

DISPLAY
Press

→ Displays receiving channel for

4 seconds.
Press again

→ Removes display.

• Temporarily displays receiving

channel when in Closed Caption
mode.

INPUT
Press

→ Switches to external video

INPUT 1 mode.
Press twice

→ Switches to external video

INPUT 2 mode.
Press 3 times

→ Switches to external

video INPUT 3 mode or COMPONENT
mode.
Press 4 times

→ Switches back to the

original TV mode. (See page 40.)

ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels, when
using the REMOTE KEYPAD button.
(See page 42.)

CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
• See pages 29–31 for Channel Setting.
• Moves the “E” mark on the MENU

screen

SKIP/VCR-CH
(See page 42.)

REC
(See page 42.)

LIGHT
Press

→ All the shaded operation buttons

will light up. At the same time, the selected
MODE button, either CATV/DVD or TV/
VCR will flash.

27F541

8