Sharp 27F641 - Manual (Page 32)

32
Dimension: 140 X 215 mm
6
Press MENU to exit.
When the BLUE SCREEN is set to “ON”
Note:
• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal. To continue watching TV under these conditions, switch
the BLUE SCREEN “OFF”.
• While INPUT1, 2 or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if
BLUE SCREEN is turned on.
Set Up (Continued)
MENU
No signal
after 15
minutes
Power turns off
automatically
Blue screen
Standby mode
27F541 32