Stinger JPEG 2000 - Manual (Page 2)

About This Manual
ABOUT THIS MANUAL
Before installing stand alone DVRX, be sure to thoroughly review and follow the instructions in this User’s
Manual. Pay particular attention to the parts that are marked NOTICE.
Strong recommendation on installation of the DVRX unit
1. Check the electrical source at the location you want to install the DVRX unit is stable and meets the DVRX
electrical specifications. Unstable electrical supplies may cause recording malfunctions or give critical damage
to the unit.
2. Several chips on the main board of the DVRX unit and hard disk drive inside generate heat, which must be
properly dispersed. Do not allow objects to block the fan on the rear of the unit.
3. Put the DVRX in a well-ventilated place and do not put heat-generating objects near the unit. When it is
installed inside 19 inch equipment rack together with other devices, please check the rack ventilation fan is
fully operational & running.