Southbend METAL-CUTTING BANDSAW SB1019 - Manual (Page 54)

-52-
For Machines Mfg. Since 8/09 Model SB1019 P A R T S
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.
901
902 903
904
905
906
907
908 909
910
911
912
913
914
901
915
REF PART # DESCRIPTION REF PART # DESCRIPTION
901 PSBLABEL04HS EYE INJURY HAZARD LABEL 909 PSB1019909 MACHINE ID LABEL
902 PSBLABEL14HS CUTTING HAZARD LABEL 910 PSBLABEL13HS KEEP DOOR CLOSED LABEL
903 PSBLABEL02HS DISCONNECT POWER LABEL 911 PSBPAINT01 SB GRAY TOUCH-UP PAINT
904 PSB1019904 SPEED DIAL LABEL 912 PSBPAINT02 SB LIGHT BLUE TOUCH-UP PAINT
905 PSBLABEL15L ELECTRICITY LABEL 913 PSBPAINT03 SB DARK BLUE TOUCH-UP PAINT
906 PSB1019906 MACHINE DAMAGE HAZARD LABEL 914 SB1319 SOUTH BEND NAMEPLATE 90MM
907 PSBLABEL06HL BIOHAZARD WARNING LABEL 915 PSB1019915 BLADE DIRECTION LABEL
908 PSB1019908 MODEL NUMBER LABEL
Machine Labels