SMC Networks SMC Barricade g SMC2804WBR - Manual (Page 78)

Configuring the Wireless Barricade g Router
68
• Connection Policy – Enter the appropriate values for TCP/
UDP sessions as described in the following table.
Parameter Defaults Description
Fragmentation
half-open wait 10 sec Configures the number of seconds that a
packet state structure remains active. When
the timeout value expires, the router drops the
unassembled packet, freeing that structure for
use by another packet.
TCP SYN wait 30 sec Defines how long the software will wait for a
TCP session to synchronize before dropping
the session.
TCP FIN wait 5 sec Specifies how long a TCP session will be
maintained after the firewall detects a FIN
packet.
TCP connection
idle timeout 3600 sec
(1 hour) The length of time a TCP session will be
maintained if there is no activity.
UDP session idle
timeout 30 sec The length of time a UDP session will
maintained if there is no activity.
H.323 data channel
idle timeout 180 sec The length of time an H.323 session will be
maintained if there is no activity.