beautypg.com

English – Shure WH30XLR User Manual

Page 6

background image

5

English

3. Wash the headband in mild, soapy water and rinse it in clean water.
4. Allow the headband to air-dry thoroughly.
5. Slide the headband around the wireframe to its original position. Reattach the

cable with the plastic retainer.

WASHING THE FOAM WINDSCREEN

The foam windscreen protects the WH30’s microphone-element from dirt

and moisture. When necessary, it can be removed and cleaned in a mild soapy

water solution. Important: Never clean the windscreen with any liquid solution

without first removing the windscreen from the microphone boom.
1. Hold the windscreen loosely by the plastic retaining ring at its base.
2. Gently pull the windscreen away from microphone. The plastic retaining ring

will expand to allow the windscreen to slip off the microphone. If necessary,

you can expand the ring manually with a small screwdriver as you pull the

windscreen.

3. Immerse the windscreen in mild soapy water and gently squeeze it several

times.

4. Rinse the windscreen in clean water and dry it with a clean cloth or paper tow-

el. Allow it to air-dry thoroughly.

5. When the windscreen is dry, slide it over the WH30 microphone until the re-

taining ring snaps into place.

CERTIFICATION

The WH30XLR conforms to European EMC Directive 89/336/EEC, and is eligible to bear the

CE marking. Meets applicable tests and performance criteria in European standard EN 55103

(1996) parts 1 and 2, for residential (E1) and light industrial (E2) environments. The WH30TQG

conforms to European EMC Directive 89/33/EEC, and is eligible to bear the CE marking. Meets

EMC require–ments as an ancillary device per EN 300 445 (1996)

REPLACEMENT PARTS

Cable Connector (for WH30TQG only)

WA330

. . . . . . . . . . . . . . . . . . . . . . . . . . .

Connector Belt Clip (for WH30XLR only)

RK200BC

. . . . . . . . . . . . . . . . . . . . . . .

Elastic Headband

80A505B

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Wireframe, Headband, Boom Hinge, Boom, Shock Mount,

Cartridge Housing and Cable

RPM520

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Preamplifier Assembly

RPM420

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Black Windscreens (2) and Clothing Clip

90WP1371

. . . . . . . . . . . . . . . . . . . . . .