Shure WH30XLR - Manual (Page 2)

1
English
INTRODUCTION
The Shure Model WH30 is a light yet rugged headset microphone. Designed
for vocalists and instrument-playing vocalists, the WH30 utilizes a high quality
electret-condenser cartridge suitable for all applications where mobility,
comfort, low microphone-visibility, and high sound quality are required.
Because of its cardioid (unidirectional) pickup pattern, the WH30 provides
isolation from extraneous sound sources and high gain-before-feedback.
The wireframe and gooseneck adjust to any head size and shape. An
integrated elastic CROAKIES  headband comfortably pads and secures the
headset. The WH30 is supplied with two snap-on windscreens, clothing clip,
storage bag and cable-management device.
FEATURES
• Smooth, natural frequency response comparable to professional condenser
hand-held microphones
• Lightweight wireframe and headband adjust for a secure, comfortable fit
• Extra-strong, small-diameter microphone cable resists breakage
• Moisture-proof cartridge housing
• Sturdy gooseneck-boom holds mic securely in place
• lsolation shock mount for reduced handling noise
• Matte black finish for low visibility
• High input clipping level helps avoid overload distortion
• Low self-noise and high sound pressure level capability
• Reliable at temperature and humidity extremes
MODEL VARIATIONS
• WH30TQG: For wireless use, the WH30TQG has a 1.5m (5 ft.) high-flex cable
and a mini TA4F connector for direct connection to Shure body pack transmit-
ters. (Note: for information about use with Shure W10BT or other transmitters
without a mini TA4F connector, contact Shure Customer Service).
• WH30XLR: For wired applications, the WH30XLR is supplied with a 1.5m (5
ft.) hi-flex cable and high quality mic preamplifier (RPM420) with a three pin
XLR connector. The RPM420 preamplifier requires phantom power from any
11 – 52 V source.