Sony CMT-CP33MD - Manual (Page 12)

12
Recording a CD on an MD or a
tape (continued)
Recording on a tape
You can use TYPE I (normal) or TYPE II (CrO 2 )
tape. The recording level is automatically
adjusted.
? / 1 (power)
TAPE nN
2,3 CD x
TAPE x
5,7 6
1 4
DOLBY
NR *
* This tape deck is equipped with the Dolby B-type
noise reduction system.
1
Press TAPE Z and insert a blank tape.
With the side you want to
record on facing you
2
Press CD Z and place a CD on the disc
tray.
With the label
side up. When
you play a CD
single (8 cm
CD), place it on
the inner circle
of the tray.
3
Press CD Z to close the disc tray.
4
Press SYNCHRO REC repeatedly until
“CD-TAPE SYNC” appears.
5
Press ENTER/START.
The tape deck stands by for recording and
the CD player pauses for play.
6
Press DIRECTION repeatedly until g
appears to record on one side or h (or
j
) to record on both sides.
7
Press ENTER/START.
Recording starts.
When the recording is completed, the CD
player and the tape deck stop automatically.
To stop recording
Press CD x or TAPE x.