Shure M267 - Manual

GENERAL
The Shure Model M267 is a microphone mixer-remote
amplifier specifically designed for professional applications.
The excellent performance, versatility and features of this
complete, compact console make it an ideal choice for stu-
dio, remote, or sound reinforcement use, and as an add-on
mixer for expanding existing facilities. It is also ideally suited
for use with audio and video tape recorders to provide multi-
ple microphone inputs.
Features:
S
Wide, flat frequency response and extremely low dis-
tortion up to +18 dBm output
S
Extremely low noise and RF susceptibility
S Four switchable microphone- or line-level balanced-line
inputs with individual gain controls and low-frequency
rolloff switches. MUMETAL shielding on input transform-
ers
S
Feedback-type input gain controls for maximum clip-
ping levels and dynamic range
S
Output switchable for line or microphone level
S
Built-in switchable peak limiter cuts output overload
distortion, adapts to power supply voltage
S
LED indicator shows limiter operation or overload with
limiter defeated
S
Externally adjustable limiter threshold (–4 to +18 dBm)
S
VU meter calibrated for +4 and +8 dBm with range
switch. Illuminated with ac operation
S
Ac or built-in battery operation. Noiseless automatic
switchover to battery in case of ac line failure. Battery
test without program interruption
S
Front-panel headphone level control and monitor jack
drives almost any stereo or mono headphones; output
can be additional unbalanced line feed to drive a tape
recorder or power amplifier
S
Direct mix bus for stacking units
S
Automatic muting prevents speaker damage during
turn-on and -off
S
Low distortion, high-stability tone oscillator for line test
and level checks
S
All connections phased. Line output terminals phase-
indicated
S
Compact and lightweight, with rugged, abrasion-resis-
tant case
S
Internally selectable 120 or 240 Vac, 50/60 Hz opera-
tion
S
Underwriters’ Laboratories Listed and Canadian Stan-
dards Association listed as Certified
SPECIFICATIONS
Frequency Response
30 Hz to 20,000 Hz,
±
2 dB
Voltage Gain (at 1,000 Hz)
(Outputs terminated: line 600
W,
microphone 150
W,
mix
bus 3.3 k
W,
headphone 200
W
, tip-sleeve and ring-
sleeve )
Inp t
OUTPUT
Input
Line Microphone Mix
Bus
Low-Impedance
Microphone (150
Ω
)
91 dB 41 dB 24 dB
Line 40 dB –9 dB –27 dB
Mix Bus 55 dB 5 dB – –
Inputs
IMPEDANCE
Input
Designed
for Use
With
Actual
(Internal)
Input
Clipping Level
Microphone 19 to
600
Ω
1 k Ω –32 dBV to
–5 dBV
∗
(25 mV to 0.56 V)
Line Less
than10 k
Ω
66 k
Ω
+20 dBV
Mix Bus 3.5 k
Ω
3.5 k
Ω
+7 dBV (2.2 V)
∗
Depending on input control setting
Shure Brothers Incorporated
222 Hartrey Avenue
Evanston IL 60202-3696 U.S.A.
Model M267 User Guide
27A8376 (SE)
E 1999, Shure Brothers Incorporated
Printed in U.S.A.