Sony DAV-LF1 - Manual (Page 83)

Oth
e
r Operatio
ns
83 GB
6
Create an index name by using the
cursor buttons:
Press X/x to select a character, then press c
to move the cursor to the next position.
If you make a mistake
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character. Capital letters,
numbers, and other symbols can be input
for a radio station name.
7
Press ENTER.
The station name is stored.
Note
When an RDS (page 83) broadcast is being received,
you cannot enter a name. A name that has already been
entered will be cancelled when an RDS broadcast is
received.
What is the Radio Data
System?
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
RDS is available only for FM stations.*
Note
RDS may not work properly if the station you are tuned
to is not transmitting the RDS signal properly, or if the
signal strength is weak.
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the
TUNER information.
* If an RDS broadcast is not received, the station
name may not appear in the display.
Using the Radio Data
System (RDS)