Sony DAV-LF1 - Manual (Page 38)

38 GB
Adjusting the height of the
front speakers and the
surround speakers
When adjusting the speaker height, lay the
speaker horizontal and have plenty of soft
cushioning around it to prevent damage in the
event that the speaker should fall.
1
Remove the back cover.
2
Remove the cover and the two inner
stoppers. (Although there are three
stoppers inside the pole, note that the
stopper close to the plate should stay
attached.)
3
Adjust the speaker slowly with the
attached tape in place to prevent the
speaker cord (and the AC power cord
(mains lead) of the surround speaker
(L)) from being pinched between the
speaker and the pole.
Do not pull the speaker cord too strongly, or
the speaker cord will separate from the
speaker.
4
Attach the cover (S) and slide the
speaker until it stops.
e.g., the surround
speaker (L)
e.g., the surround
speaker (L)
e.g., the surround
speaker (L)