SMC Networks SMCWPCIT-G - Manual (Page 33)

U
SING THE
SMCWPCIT-G U
TILITY
P
ROGRAM
23
establish an ad hoc network, make sure the Channel is set to the
same radio channel as that used by the other wireless clients in
your group. However, if you are connecting to a network via an
access point, the adapter will automatically use the same channel
as that used by the access point.
The available channel settings are limited by local regulations that
determine the number of available channels.
Current Connection Speed - Shows the speed of the current
wireless connection.
Current Rx Rate - This is the transmission rate of the current
connection.
Encryption - This shows the encryption type of your wireless
network.
Operating Mode - This adapter supports 802.11b and 802.11g
mode.
Status - This is the station status.
Throughput - Shows the total number of data packets
transmitted and received.
Signal Strength - Shows the relative strength of the wireless
connection.
Link Quality - Shows the link quality of the wireless connection.