beautypg.com

Sony VPL-CS20 User Manual

Page 7

background image

7

Location and Function of Controls

Ov
e

rv

ie

w

Before using the Remote
Commander

Pull out the clear film from the lithium
battery holder.

To replace a battery

1

Release the lock of the lithium battery
holder by picking it, and pull out the
holder from the Remote Commander.

2

Install the lithium battery.

3

Put the lithium battery holder back
into the Remote Commander.

Notes on the lithium battery
• A button type lithium battery (CR2025) is

used in the Remote Commander. Do not
use batteries other than CR2025.

• Keep the lithium battery out of the reach of

children.

• Should the battery be swallowed,

immediately consult a doctor.

Notes on Remote Commander
operation
• Make sure that nothing obstructs the

infrared beam between the Remote
Commander and the remote control
detector on the projector. Direct the
Remote Commander toward the remote
control detector.

• The operation range is limited. The shorter

the distance between the Remote
Commander and the remote control
detector is, the wider the angle within
which the commander can control the
projector becomes.

Face the +
side up.