Sony VPL-CS20 - Manual (Page 5)

5
Location and Function of Controls
Ov
e
rv
ie
w
a ZOOM +/– key
Adjusts the picture size.
b INPUT key
c ?/1 (On/Standby) key
Turns on the projector when the
projector is in standby mode. The ON/
STANDBY indicator around the ?/1 key
flashes in green until the projector is
ready to operate.
d TILT adjustment key
Adjusts the tilt of the projector.
For details, see “Projecting” on
page 11.
e ON/STANDBY indicator (located
around the ? /1 key)
Lights up or flashes under the following
conditions:
– Lights in red when the AC power cord
is plugged into a wall outlet. Once the
projector is in standby mode, you can
turn it on with the ?/1 key.
– Lights in green when the power is
turned on, and when it is ready to
operate.
– Flashes in green from the projector is
turned on until the projector is ready to
operate. Also, flashes in green while
the cooling fan is running after the
power is turned off with the ?/1 key.
The fan runs for about 45 seconds after
the power is turned off.
For details, see page 14.
f FOCUS +/– key
Adjusts the picture focus manually.
g AUTO FOCUS key
Adjusts the picture focus automatically.
h Status indicators
• POWER SAVING
Lights when the projector is in power
saving mode.
• TEMP (Temperature)/FAN
Lights or flashes under the following
conditions:
– Lights when the temperature inside
the projector becomes unusually
high.
– Flashes when the fan is broken.
• LAMP/COVER
Lights or flashes under the following
conditions:
– Lights when the lamp has reached
the end of its life or reaches a high
temperature.
– Flashes when the lamp cover or air
filter cover is not secured firmly.
For details, see page 37.
i AUDIO/VIDEO connector
Connects to the audio output and video
output, or S video output (Y/C video
output) of the video equipment or the
computer.
Control/Connector Panel
Open the cover to use the AUDIO/
VIDEO IN connector.
Push