Performing auto calibration, Set up the optimizer microphone, Press amp menu, then press auto cal – Sony HTSF2300 User Manual
Page 27: Ge tting star te d example: ht-ss2300

27
GB
Ge
tting Star
te
d
Example: HT-SS2300
1
Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack on the front panel.
2
Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position.You can also use a stool
or tripod so that the optimizer
microphone remains at the same height as
your ears.
Tip
When you face the speaker towards the optimizer
microphone, you will get a more accurate
measurement.
Press AMP MENU, then press
AUTO CAL.
You can also select “A.CAL YES” in the
A. CAL menu.
The following appears on the display.
A.CAL [5]
t A.CAL [4] t A.CAL [3] t
A.CAL [2]
t A.CAL [1]
The measurement process will take
approximately 30 seconds to complete.
The table below shows the display when
measurement starts.
Note
You cannot measure the speaker height of the
surround speakers. Set this value using “SUR POS.”
parameters in the SYSTEM menu (page 37).
MASTER VOLUME
AUTO CAL MIC
MUTING
INPUT SELECTOR
PRESET
ACTIVE
STANDBY
TUNING
SOUND FIELD
?/1
Optimizer
microphone
Performing Auto Calibration
Measurement for
Display
Speaker existance
TONE
Speaker gain, distance,
frequency response
T.S.P.
Subwoofer gain and distance
WOOFER
1
2
3
4
6
7
8
0/10
ENTER
9
SYSTEM STANDBY
TV INPUT
SLEEP
DMPORT
VIDEO1
VIDEO2
BD
DVD
2CH
A.F.D.
RETURN/EXIT
MOVIE
MUSIC
AMP MENU
CLEAR
DISPLAY
MUTING
TV VOL
MASTER VOL
DVD/BD
MENU
AUTO CAL
D.TUNING
D.SKIP
THEATRE
SAT
TV
SA-CD/CD TUNER
?/1
-
O
5
>10
TV ?/1
AV ?/1
MEMORY
MENU/HOME
TOOLS/
OPTIONS
AUTO CAL
Input
buttons
?/1
switch
MASTER
VOL +/–
MUTING
AMP MENU
continued