Symbol Technologies QRG PDT 8100 - Manual (Page 35)

33
Q u i c k R e f e r e n c e
Terminals with an integrated imager:
The terminal
does not save im-
ages. The still Image
Capture program
is not enabled. Enable Image Capture.
The still Image Capture program is
application dependent. To enable
the ImageDemo application, select
ImageDemo from the Start menu.
Tap the
Snap button (in Capture
mode) or press the scan trigger to
enable the ImageDemo.
Aim Target or Illu-
mination is not
available. Aim or Illumina-
tion may be
turned off. Enable Aim or Illumination.
The still Image Capture program is
application dependent. To enable
the Aim and Illumination features in
the ImageDemo application, select
ImageDemo from the Start menu.
Select Capture from the Mode
menu. Tap the Aim and/or Illumina-
tion check boxes to enable.
Problem Cause Solution
6598801a.fm Page 33 Monday, December 8, 2003 2:01 PM