Symbol Technologies QRG PDT 8100 - Manual (Page 29)

27
Q u i c k R e f e r e n c e
Using the Cradle
To communicate through the cradle:
1. Ensure all connections between the cradle and the host computer
are secure. Refer to the Quick Reference Guide that shipped with
your cradle for instructions on setting up the cradle.
2. Power on the host computer, the cradle, and the terminal.
3. Insert the terminal into the cradle.
4. Begin host communications as specified by your application.
Communicating with Printers
To print from a standard printer:
1. Attach an RS-232 serial cable to the serial port in the bottom of the
terminal.
2. Attach the other end of the cable to the serial port on the printer.
3. Run your application’s print function.
To print from an IrDA-compliant printer:
1. Point the IrDA port on the back of the terminal at the IrDA port on the
printer, at a maximum distance of 39 inches (1 meter).
2. Run the application’s print function.
Note: The terminal must have software configured to communicate
with the printer you are using.
Maintaining the Terminal
To maintain your terminal in good working order:
• Do not scratch the screen. Use the supplied stylus or plastic-tipped
pens intended for use with a touch-sensitive screen. Never use a
pen or pencil or other sharp object on the screen.
• Although your terminal is water and dust resistant, do not expose it
to rain or moisture for an extended period of time. Treat your terminal
as you would a pocket calculator or other small electronic instru-
ment.
• The touch-sensitive screen of your terminal contains glass. Do not
drop your terminal or subject it to strong impact.
• Protect your terminal from temperature extremes. Do not leave it on
the dashboard of a car on a hot day, and keep it away from heat
sources.
• Do not store or use your terminal in any location that is extremely
dusty, damp or wet.
6598801a.fm Page 27 Monday, December 8, 2003 2:01 PM